stm32l4

STM32 core support for Arduino

Customizable Bootloader for STM32 microcontrollers. This example demonstrates how to perform in-application-programming of a firmware located on an external SD card with FAT32 file system.

Efficient DMA timeout mechanism for peripheral DMA configured in circular mode demonstrated on a STM32 microcontroller.

All CMSIS and HAL code for the STM32 microcontrollers bundled together in one repository.

Library for NRF24L01 + Demo projects for STM32 NUCLEO boards.

Github Pages for the STM32-base project.

Get the best AHRS accuracy out of the Tlera USFS with good sensor calibration

CMix-NN: Mixed Low-Precision CNN Library for Memory-Constrained Edge Devices

Finds every I2C device on the bus.

Example host MCU sketch to demonstrate use of the USFSMAX coprocessor

Driver for the range of RFM95(W) (LoRA) RF transceiver modules using STM32Cube HAL

Driver for the PCA9685 12-bit PWM driver using STM32Cube HAL

nRF52823 BLE/UART bridge and OTA firmware update utility for Pesky Products STM32L4 Arduino boards

Add BLE Connectivity to Tlera STM32L4 and Teensy3.X MCU Develoment Boards

#5A - STM32L496 based module developed by the HFT Institute @ HS-MA - includes: -10 MHz reference oscillator, -GPS-Tracker, -LoRaWAN device, -APRS TRX, -GPRS transfers and much more...

Test sketches and information to use the improved USFSMAX Module with MMC5983 magnetometer

STM32 expansion package providing an integrated solution for a robust protection of MCU-based USB Type-C applications

#4 - BiTuner Controller (STM32L476) for a symmetric antenna matcher - the DL0WH solution. Relay PCB is taken from the DJ0ABR solution at this point of time.

NUCLEO-L432KC Enbedded Rust Quickstart

HAL for the STM32L4x6 family of microcontrollers

RTC-based scheduler implementation suitable for ultra-low power applications, where recurring tasks are needed to be executed with long periods. Can be effectively combined with RTOS.

This purpose of this project is to bypass the physical requirements of the BootLoader access. The approach is the trigger the MCU to enter BootLoader Mode via UART by only using Tx, Rx and Gnd pins. Moreover, the trigger UART port can also be used to program the MCU.

Debugging tool for SPI devices, built for STM32 microcontrollers

Baremetal project for Arm Cortex-M4 STM32L431RCT

Driver for the SHT3x temperature and humditiy sensor using STM32Cube HAL

Blinky hello world based on STM32L476RG Nucleo board

A hardware abstraction layer for the STM32L433 ARM microcontroller series.

STM32 based project on Person and Tone Identification